Residential · Palm Coast, FL
Failed coatings usually come down to bad prep, trapped moisture, or the wrong primer. Elite Epoxy Palm Coast has served Palm Coast since 2016, handling epoxy removal and full recoats for garages, shops, warehouses, patios, and commercial interiors.
Epoxy removal starts with diagnosing what is on the slab, old 100 percent solids epoxy, polyurethane topcoat, paint, glue residue, or acrylic sealer, plus why it failed (hot-tire pickup, fisheyes, delamination, or moisture). We protect walls and doors, mask drains and joints, then remove coatings with walk-behind diamond grinders connected to HEPA dust extractors for controlled, consistent profiling. Depending on the slab, we follow ICRI concrete surface profile guidelines (typically CSP 2 to CSP 3 for most epoxy systems) and address cracks, spalls, and pitted areas with epoxy mortar or polyurea crack repair before any new coating goes down.
Palm Coast humidity and salty air can magnify adhesion problems if the slab is not dry and properly profiled, so we verify moisture conditions and choose the right base system for the space. For recoats, we use moisture-tolerant epoxy primers where needed, then build with 100 percent solids epoxy, optional vinyl color flakes or quartz broadcast, and a urethane or polyaspartic clear coat for abrasion and UV resistance. Garage floors often get a full flake broadcast with a satin polyaspartic topcoat for easy cleaning, while commercial areas may use a smoother epoxy build with slip-resistant aluminum oxide additive. The goal is a flat, bonded system that resists tire plasticizers, chemicals, and wear, not a quick roll-on cover-up.
Palm Coast customers choose us because we remove the weak layer instead of coating over it, and we document the process so you know what you are paying for. You get a written scope that spells out the grinding method, repair materials, number of coats, and target thickness ranges based on the system selected. Our crews show up with the right equipment, walk-behind grinders, edge grinders, industrial vacuums, and calibrated mixing tools, then keep the site tidy and safe for households, customers, and employees. As a licensed and insured epoxy contractor, we focus on long-term adhesion and clean transitions at walls, doorways, and control joints.
At the end, we do a full walkthrough and confirm coverage, texture, and sheen, plus how the coating meets edges, steps, and drains. You will receive care and maintenance instructions (cleaners to use, what to avoid, and when to return heavy loads), along with realistic cure timelines for foot traffic, vehicles, and equipment. If your project includes a flake or quartz system, we scrape and vacuum the broadcast, then apply the final clear coats for a sealed, uniform finish. The result is a recoated floor that looks consistent, is easier to keep clean, and is built on proper epoxy removal, repairs, and surface prep.
Yes. We provide a free written estimate after an on-site look at the slab, existing coating condition, cracks, and exposure to sun and moisture.
Sometimes. We evaluate bond strength and thickness, then grind and recoat if the existing system is stable. If it is peeling or contaminated, removal and a fresh system is usually the reliable option.
A high-gloss clear coat can be slick with water. We can add anti-slip media and/or use flake or quartz textures to improve traction while keeping the floor easy to clean.
Yes. For garages and commercial spaces we can add epoxy cove base details and clean transitions at door thresholds to improve wash-down and reduce dirt traps.
We coat patios, lanais, pool decks, workshops, storage rooms, retail back rooms, and many commercial concrete floors. We will recommend the right system based on traffic, chemicals, and UV exposure.
If your floor is peeling, bubbling, stained, or slick, epoxy removal is usually the only reliable way to reset the system and get back to a bonded, long-wearing finish. Elite Epoxy Palm Coast removes failed epoxy and recoats concrete for residential and commercial spaces using diamond grinding, dust-controlled equipment, and proven resin systems matched to the slab and how the space is used.
Most epoxy failures are adhesion failures, not “bad paint.” Hot-tire pickup, delamination, fisheyes, and soft spots often trace back to improper surface profile, residue from cleaners or silicones, or moisture vapor moving through the slab. Our process starts by identifying the existing coating and the failure mode, then mechanically removing it with walk-behind diamond grinders and edge tools. We aim for an ICRI-appropriate surface profile (commonly CSP 2 to CSP 3) so primers and base coats can wet into the concrete and lock in.
After removal, we repair cracks, pits, and damaged joints, then select the right build for your goals. For many garages and retail spaces, a 100 percent solids epoxy base with a vinyl flake broadcast and a polyaspartic clear coat provides strong chemical resistance and easy cleaning. For back-of-house commercial floors, we may recommend a smoother epoxy system with a slip-resistant additive and a urethane topcoat for abrasion control. Each system is mixed accurately, applied at the proper spread rate, and finished with clean cut lines at walls and thresholds.
You get a written estimate, a clear prep plan, and a walkthrough at completion with cure-time guidance for foot traffic and vehicles. If you are searching for epoxy removal in Palm Coast, the difference is simple: remove what is failing, prepare the concrete correctly, and recoat with materials designed for the space. That is how you avoid repeat peeling and get a floor that performs year after year.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Palm Coast. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
